refactor(core): move clamps into OpenNest.Clamps

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>

OpenNest.Core/AutomaticCutOffPlanner.cs

@@ -1,6 +1,7 @@
 using System;
 using System.Collections.Generic;
 using System.Linq;
+using OpenNest.Clamps;
 using OpenNest.CNC;
 using OpenNest.Converters;
 using OpenNest.Geometry;

OpenNest.Core/CNC/CuttingPlanning/FixedLeadReview.cs

@@ -2,6 +2,7 @@ using System;
 using System.Collections.Generic;
 using System.Linq;
 using System.Threading;
+using OpenNest.Clamps;
 using OpenNest.CNC.CuttingStrategy;
 using OpenNest.Diagnostics;
 using OpenNest.Geometry;

OpenNest.Core/Clamps/ClampEdge.cs

@@ -1,6 +1,6 @@
 using System;
 
-namespace OpenNest
+namespace OpenNest.Clamps
 {
     /// <summary>
     /// The sheet edge a <see cref="ClampRail"/> clamp sits on, named relative to the plate

OpenNest.Core/Clamps/ClampRail.cs

@@ -3,7 +3,7 @@ using System.Collections.Generic;
 using System.Linq;
 using OpenNest.Geometry;
 
-namespace OpenNest
+namespace OpenNest.Clamps
 {
     /// <summary>
     /// The machine's fixed clamp rail: identical rectangular clamps, each on one sheet edge

OpenNest.Core/Clamps/ClampZone.cs

@@ -1,7 +1,7 @@
 using System;
 using OpenNest.Geometry;
 
-namespace OpenNest
+namespace OpenNest.Clamps
 {
     /// <summary>
     /// A fixed rectangular keep-out region in plate coordinates (the sheet's own frame:

OpenNest.Core/Clamps/ClampZoneFrame.cs

@@ -2,7 +2,7 @@ using System;
 using System.Collections.Generic;
 using OpenNest.Geometry;
 
-namespace OpenNest;
+namespace OpenNest.Clamps;
 
 /// <summary>
 /// Maps a plate's <see cref="Plate.ClampZones"/>, stored in the sheet's lower-left frame

OpenNest.Core/Diagnostics/ClampCutDiagnostics.cs

@@ -1,5 +1,6 @@
 using System;
 using System.Collections.Generic;
+using OpenNest.Clamps;
 using OpenNest.Geometry;
 
 namespace OpenNest.Diagnostics;

OpenNest.Core/Diagnostics/OverlapGeometryStamp.cs

@@ -1,6 +1,7 @@
 using System;
 using System.Collections.Generic;
 using System.Linq;
+using OpenNest.Clamps;
 using OpenNest.CNC;
 
 namespace OpenNest.Diagnostics;

OpenNest.Core/Diagnostics/PlateOverlapAnalyzer.cs

@@ -2,6 +2,7 @@ using System;
 using System.Collections.Generic;
 using System.Linq;
 using System.Threading;
+using OpenNest.Clamps;
 using OpenNest.CNC;
 using OpenNest.CNC.CuttingPlanning;
 using OpenNest.Converters;

OpenNest.Core/Diagnostics/PostVerificationAnalyzer.cs

@@ -2,6 +2,7 @@ using System;
 using System.Collections.Generic;
 using System.Linq;
 using System.Threading;
+using OpenNest.Clamps;
 using OpenNest.CNC;
 using OpenNest.CNC.CuttingPlanning;
 using OpenNest.Geometry;

OpenNest.Core/Nest.cs

@@ -1,5 +1,6 @@
 using System;
 using System.Collections.Generic;
+using OpenNest.Clamps;
 using OpenNest.Collections;
 using OpenNest.Geometry;
 using OpenNest.Support;

OpenNest.Core/Plate.Clamps.cs

@@ -2,6 +2,7 @@ using System;
 using System.Collections.Generic;
 using System.Collections.Immutable;
 using System.Linq;
+using OpenNest.Clamps;
 using OpenNest.Collections;
 using OpenNest.Geometry;
 
@@ -35,7 +36,7 @@ namespace OpenNest
 
         /// <summary>
         /// The gap part material keeps from every clamp zone: the rail's own
-        /// <see cref="OpenNest.ClampRail.Clearance"/>, else the bottom edge spacing (D6), never
+        /// <see cref="OpenNest.Clamps.ClampRail.Clearance"/>, else the bottom edge spacing (D6), never
         /// negative. Part spacing never applies to clamps.
         /// </summary>
         public double ClampClearance =>
@@ -57,7 +58,7 @@ namespace OpenNest
         /// <summary>
         /// Minutes this sheet's cut-time estimate gains from <see cref="RemovedClamps"/> (D9):
         /// each listed clamp the rail places on this sheet adds
-        /// <see cref="OpenNest.ClampRail.RemovalMinutes"/> once; a listed clamp that is beyond
+        /// <see cref="OpenNest.Clamps.ClampRail.RemovalMinutes"/> once; a listed clamp that is beyond
         /// the sheet (or unknown to the rail) is not pulled and costs nothing. Zero when there
         /// is no rail (removal is meaningless without one to remove clamps from).
         /// </summary>

OpenNest.Core/Plate.cs

@@ -1,6 +1,7 @@
 using System;
 using System.Collections.Generic;
 using System.Linq;
+using OpenNest.Clamps;
 using OpenNest.Collections;
 using OpenNest.Geometry;
 using OpenNest.Support;

OpenNest.Core/SheetOutline.cs

@@ -2,6 +2,7 @@ using System;
 using System.Collections.Generic;
 using System.Linq;
 using Clipper2Lib;
+using OpenNest.Clamps;
 using OpenNest.Geometry;
 
 namespace OpenNest