feat: add CincinnatiPostConfig and supporting enums

OpenNest.Posts.Cincinnati/CincinnatiPostConfig.cs

@@ -0,0 +1,261 @@
+namespace OpenNest.Posts.Cincinnati
+{
+    /// <summary>
+    /// Specifies how coordinate positioning is handled between parts.
+    /// </summary>
+    public enum CoordinateMode
+    {
+        /// <summary>Set absolute position.</summary>
+        G92,
+
+        /// <summary>Use relative/incremental positioning.</summary>
+        G91,
+
+        /// <summary>Use machine coordinate system.</summary>
+        G53
+    }
+
+    /// <summary>
+    /// Specifies how G89 (hole drilling/tapping parameters) are provided.
+    /// </summary>
+    public enum G89Mode
+    {
+        /// <summary>Use external library file for G89 parameters.</summary>
+        LibraryFile,
+
+        /// <summary>Explicitly define G89 parameters in the program.</summary>
+        Explicit
+    }
+
+    /// <summary>
+    /// Specifies where kerf compensation is applied.
+    /// </summary>
+    public enum KerfMode
+    {
+        /// <summary>Controller side (using cutter compensation codes).</summary>
+        ControllerSide,
+
+        /// <summary>Pre-applied to part geometry during post-processing.</summary>
+        PreApplied
+    }
+
+    /// <summary>
+    /// Specifies which side of the cut line kerf compensation is applied to.
+    /// </summary>
+    public enum KerfSide
+    {
+        /// <summary>Kerf applied to the left side of the cut.</summary>
+        Left,
+
+        /// <summary>Kerf applied to the right side of the cut.</summary>
+        Right
+    }
+
+    /// <summary>
+    /// Specifies how M47 (optional stop) commands are used.
+    /// </summary>
+    public enum M47Mode
+    {
+        /// <summary>Always include M47.</summary>
+        Always,
+
+        /// <summary>Include M47 with block delete functionality.</summary>
+        BlockDelete,
+
+        /// <summary>Automatically determine M47 placement.</summary>
+        Auto,
+
+        /// <summary>Do not use M47.</summary>
+        None
+    }
+
+    /// <summary>
+    /// Specifies when pallet exchange occurs.
+    /// </summary>
+    public enum PalletMode
+    {
+        /// <summary>No pallet exchange.</summary>
+        None,
+
+        /// <summary>Pallet exchange at end of sheet.</summary>
+        EndOfSheet,
+
+        /// <summary>Pallet exchange at start and end of sheet.</summary>
+        StartAndEnd
+    }
+
+    /// <summary>
+    /// Configuration for Cincinnati post processor.
+    /// Defines machine-specific parameters, output format, and cutting strategies.
+    /// </summary>
+    public class CincinnatiPostConfig
+    {
+        /// <summary>
+        /// Gets or sets the configuration name/identifier.
+        /// Default: "CL940"
+        /// </summary>
+        public string ConfigurationName { get; set; } = "CL940";
+
+        /// <summary>
+        /// Gets or sets the units for posted output.
+        /// Default: Units.Inches
+        /// </summary>
+        public Units PostedUnits { get; set; } = Units.Inches;
+
+        /// <summary>
+        /// Gets or sets the decimal accuracy for numeric output.
+        /// Default: 4
+        /// </summary>
+        public int PostedAccuracy { get; set; } = 4;
+
+        /// <summary>
+        /// Gets or sets how coordinate positioning is handled between parts.
+        /// Default: CoordinateMode.G92
+        /// </summary>
+        public CoordinateMode CoordModeBetweenParts { get; set; } = CoordinateMode.G92;
+
+        /// <summary>
+        /// Gets or sets whether to use subprograms for sheet operations.
+        /// Default: true
+        /// </summary>
+        public bool UseSheetSubprograms { get; set; } = true;
+
+        /// <summary>
+        /// Gets or sets the starting subprogram number for sheet operations.
+        /// Default: 101
+        /// </summary>
+        public int SheetSubprogramStart { get; set; } = 101;
+
+        /// <summary>
+        /// Gets or sets the subprogram number for variable declarations.
+        /// Default: 100
+        /// </summary>
+        public int VariableDeclarationSubprogram { get; set; } = 100;
+
+        /// <summary>
+        /// Gets or sets how G89 parameters are provided.
+        /// Default: G89Mode.LibraryFile
+        /// </summary>
+        public G89Mode ProcessParameterMode { get; set; } = G89Mode.LibraryFile;
+
+        /// <summary>
+        /// Gets or sets the default G89 library file path.
+        /// Default: empty string
+        /// </summary>
+        public string DefaultLibraryFile { get; set; } = "";
+
+        /// <summary>
+        /// Gets or sets whether to repeat G89 before each feature.
+        /// Default: true
+        /// </summary>
+        public bool RepeatG89BeforeEachFeature { get; set; } = true;
+
+        /// <summary>
+        /// Gets or sets whether to use exact stop mode (G61).
+        /// Default: false
+        /// </summary>
+        public bool UseExactStopMode { get; set; } = false;
+
+        /// <summary>
+        /// Gets or sets where kerf compensation is applied.
+        /// Default: KerfMode.ControllerSide
+        /// </summary>
+        public KerfMode KerfCompensation { get; set; } = KerfMode.ControllerSide;
+
+        /// <summary>
+        /// Gets or sets the default side for kerf compensation.
+        /// Default: KerfSide.Left
+        /// </summary>
+        public KerfSide DefaultKerfSide { get; set; } = KerfSide.Left;
+
+        /// <summary>
+        /// Gets or sets how M47 is used in interior cuts.
+        /// Default: M47Mode.Always
+        /// </summary>
+        public M47Mode InteriorM47 { get; set; } = M47Mode.Always;
+
+        /// <summary>
+        /// Gets or sets how M47 is used in exterior cuts.
+        /// Default: M47Mode.Always
+        /// </summary>
+        public M47Mode ExteriorM47 { get; set; } = M47Mode.Always;
+
+        /// <summary>
+        /// Gets or sets the safety head raise distance (in machine units).
+        /// Default: 2000
+        /// </summary>
+        public int? SafetyHeadraiseDistance { get; set; } = 2000;
+
+        /// <summary>
+        /// Gets or sets the distance threshold for M47 override.
+        /// Default: null
+        /// </summary>
+        public double? M47OverrideDistanceThreshold { get; set; } = null;
+
+        /// <summary>
+        /// Gets or sets whether to use anti-dive functionality.
+        /// Default: true
+        /// </summary>
+        public bool UseAntiDive { get; set; } = true;
+
+        /// <summary>
+        /// Gets or sets whether to use smart rapids optimization.
+        /// Default: false
+        /// </summary>
+        public bool UseSmartRapids { get; set; } = false;
+
+        /// <summary>
+        /// Gets or sets when pallet exchange occurs.
+        /// Default: PalletMode.EndOfSheet
+        /// </summary>
+        public PalletMode PalletExchange { get; set; } = PalletMode.EndOfSheet;
+
+        /// <summary>
+        /// Gets or sets whether to use line numbers in output.
+        /// Default: true
+        /// </summary>
+        public bool UseLineNumbers { get; set; } = true;
+
+        /// <summary>
+        /// Gets or sets the starting line number for features.
+        /// Default: 1
+        /// </summary>
+        public int FeatureLineNumberStart { get; set; } = 1;
+
+        /// <summary>
+        /// Gets or sets whether to use speed/gas commands.
+        /// Default: false
+        /// </summary>
+        public bool UseSpeedGas { get; set; } = false;
+
+        /// <summary>
+        /// Gets or sets the feedrate percentage for lead-in moves.
+        /// Default: 0.5 (50%)
+        /// </summary>
+        public double LeadInFeedratePercent { get; set; } = 0.5;
+
+        /// <summary>
+        /// Gets or sets the feedrate percentage for lead-in arc-to-line moves.
+        /// Default: 0.5 (50%)
+        /// </summary>
+        public double LeadInArcLine2FeedratePercent { get; set; } = 0.5;
+
+        /// <summary>
+        /// Gets or sets the feedrate multiplier for circular cuts.
+        /// Default: 0.8 (80%)
+        /// </summary>
+        public double CircleFeedrateMultiplier { get; set; } = 0.8;
+
+        /// <summary>
+        /// Gets or sets the variable number for sheet width.
+        /// Default: 110
+        /// </summary>
+        public int SheetWidthVariable { get; set; } = 110;
+
+        /// <summary>
+        /// Gets or sets the variable number for sheet length.
+        /// Default: 111
+        /// </summary>
+        public int SheetLengthVariable { get; set; } = 111;
+    }
+}