ajandClaude Opus 5.5 74937b7952 feat(cutting): start the owner's outline on its common line ...

The part cut first no longer makes a separate uncompensated centerline
cut with its own lead-in and lead-out, then re-pierces for its
remainder. It cuts its outside compensated, which puts its shared edge
on the kerf centerline, starting on the common line: a straight lead-in
from the scrap along the shared edge, then the line and on round its
perimeter with no lead-out. A member with spans already cut stops in
that kerf and cuts its last stretch from it, ending beside the part it
is cut before. Partners still cut only their remainders.

Replay's tabbed-ring accounting now accepts pieces that tile each span
exactly once, and the pre-post review counts a span as cut by a
member's compensated edge (or an older centerline cut).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

2026-11-08 16:57:35 -05:00

..

CommonLineAutoPlacementTests.cs

feat(common-line): place parts on common lines automatically at a chosen level

2026-11-05 19:38:00 -05:00

CommonLinePlanningTests.cs

feat(cutting): start the owner's outline on its common line

2026-11-08 16:57:35 -05:00

CommonLinePostTests.cs

feat(cutting): start the owner's outline on its common line

2026-11-08 16:57:35 -05:00

CommonLineTests.cs

feat(common-line): cut each shared line once through Plan Cutting and the CI Fiber post

2026-11-05 16:51:42 -05:00

CommonLineZTests.cs

feat(cutting): start the owner's outline on its common line

2026-11-08 16:57:35 -05:00