mirror of
https://github.com/ajisaacs/OpenNest.git
synced 2026-11-20 20:27:42 -05:00
A plate with a custom outline was pushed against its bounding box only, so a part pushed toward a missing corner ran through it to the box edge and ended off the sheet. Compactor's plate pushes (Push, PushBoundingBox, SettlePlacement, Settle) now also stop at the walls of the outline: the part of the work area that is not usable material (a missing corner, an obstacle, each grown by the largest edge spacing). A mover is measured as the edge review measures it, by the circumscribed perimeter of its clean material without leads, so it rests where that review still passes. A box push stops 0.0012 short of a wall so the geometry push after it starts clear. A rectangular sheet has no walls and pushes exactly as before. SheetOutline.FromGeometry eroded the whole imported outline by the chord tolerance, so a sheet drawn 60 x 27 was stored as 59.998 x 26.998 with a chamfer at every inside corner. Each arc is now chorded on the side that takes material away (ClipperBridge.FlattenOneSided) and straight edges are kept exactly. The plate header, the plate list and Edit Plate's outline size show the size rounded to four decimals instead of the raw double. Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>