CincinnatiSheetWriter.WriteHoleSubprogramCall emitted
`M98 P<num> X<x> Y<y>`, but per manual §3.98 ("M98 SUB-PROGRAM CALL
WITH NO ARGUMENTS") M98 takes only P and L — the X/Y had no defined
meaning to the control. The intent was to position the sub-program at
the hole center, which is what G52 is for per §1.52 ("local work
coordinate system") and which explicitly does not move the nozzle.
Emit the documented G52 bracket instead:
G52 X<hole.x> Y<hole.y>
M98 P<holeSubNum>
G52 X0 Y0
The hole sub-program is authored in hole-local coordinates, so its
first rapid (the lead-in to the pierce point) resolves to the absolute
pierce under the G52 shift and moves the tool directly there from the
previous feature's end — no phantom rapid to the hole center.
Also add docs/cincinnati-post-output.md as the reference for the full
post output format, with every emitted G/M code cross-referenced to
the Cincinnati programming manual. Un-ignore docs/ (docs/superpowers/
stays ignored) and track the PDF manual alongside the reference.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
AJ Isaacs
e63be93051