mirror of
https://github.com/ajisaacs/OpenNest.git
synced 2026-10-27 11:31:07 -04:00
aj
1ed66bbf20
Pinned-lead and locked-lead warnings named a Drawing Pins Off command and a Clear Lead-ins command that the desktop does not have; name Plate > Remove Lead-ins and spacing instead. Closing Plan Cutting no longer claims nothing changed after lead-ins or cut-offs were cleared, the no-stock reason no longer says the part is larger than every sheet when only the usable area at the checked rotations is too small, and the console says whole-job engines.
67 lines
3.5 KiB
C#
67 lines
3.5 KiB
C#
using System.Collections.Generic;
|
|
using System.Linq;
|
|
using System.Threading;
|
|
using OpenNest.CNC;
|
|
using OpenNest.CNC.CuttingPlanning;
|
|
using OpenNest.CNC.CuttingStrategy;
|
|
using OpenNest.Diagnostics;
|
|
|
|
namespace OpenNest.Engine.CuttingPlanning;
|
|
|
|
/// <summary>
|
|
/// Capture-time preparation of a regenerated part's contours with its drawing's pins (D1: the
|
|
/// drawing wins). A pin that does not resolve exactly is never guessed: its contour is planned
|
|
/// from the plate settings and the plate gets a warning, so its proposal is UNVERIFIED.
|
|
/// </summary>
|
|
internal static class DrawingPinCapture
|
|
{
|
|
internal static PreparedContours Prepare(Part source, int ordinal, Program ownedClean,
|
|
CuttingParameters parameters, List<CuttingPlanFinding> warnings, CancellationToken token)
|
|
{
|
|
var prepared = PreparedContours.Capture(ownedClean, parameters, token);
|
|
// Pins switched off for this placement (D1's escape hatch) leave it to the plate settings.
|
|
if (!source.HasActiveDrawingPins)
|
|
return prepared;
|
|
// The clean program is the drawing's own program rotated by the part's rotation, so the
|
|
// resolver maps the source-frame pins onto exactly these contours.
|
|
var resolutions = CutPinResolver.Resolve(source.BaseDrawing, source.Rotation, prepared, token);
|
|
var pinned = PreparedContours.Capture(ownedClean, parameters, resolutions, token);
|
|
foreach (var resolution in resolutions.Where(r => !r.IsResolved))
|
|
warnings.Add(Warning(source, ordinal, resolution, Unresolved(resolution)));
|
|
foreach (var rejected in pinned.RejectedPins)
|
|
warnings.Add(Warning(source, ordinal, rejected, $"Drawing pin {rejected.PinIndex + 1} puts a tab on an "
|
|
+ "internal contour, but only the outside can be tabbed; planned with nest settings."));
|
|
return pinned;
|
|
}
|
|
|
|
/// <summary>
|
|
/// A part with active pins whose program is kept: locked lead-ins override the pins (they
|
|
/// are kept exactly, never refused), and an unlocked part a caller left ineligible is not
|
|
/// regenerated at all.
|
|
/// </summary>
|
|
internal static CuttingPlanFinding NotApplied(Part source, int ordinal) =>
|
|
new(ordinal, source, null, null, PostVerificationKind.FixedLead, source.LeadInsLocked
|
|
? $"Locked lead-ins override drawing pins on part {ordinal + 1}; use Plate > Remove Lead-ins, then Plan Cutting, to apply the pins."
|
|
: $"Drawing pins on part {ordinal + 1} are not applied: the part is not regenerated.")
|
|
{ FixedLead = new(null, null, null) };
|
|
|
|
private static string Unresolved(CutPinResolution resolution)
|
|
{
|
|
var pin = resolution.PinIndex + 1;
|
|
return resolution.Status switch
|
|
{
|
|
CutPinStatus.NotOnContour => $"Drawing pin {pin} no longer matches the geometry; planned with nest settings.",
|
|
CutPinStatus.OnSeveralContours => $"Drawing pin {pin} touches more than one contour; planned with nest settings.",
|
|
CutPinStatus.ContourPinnedTwice => $"Drawing pin {pin} shares its contour with another pin, so neither is used; "
|
|
+ "planned with nest settings.",
|
|
_ => $"Drawing pin {pin} cannot be placed on this drawing's program; planned with nest settings.",
|
|
};
|
|
}
|
|
|
|
private static CuttingPlanFinding Warning(Part source, int ordinal, CutPinResolution resolution, string message) =>
|
|
new(ordinal, source, null, null, PostVerificationKind.FixedLead, message)
|
|
{
|
|
FixedLead = new(null, resolution.PinIndex + 1, null)
|
|
};
|
|
}
|