mirror of
https://github.com/ajisaacs/OpenNest.git
synced 2026-11-20 19:17:40 -05:00
On a sheet with a custom outline the plate edge review, Auto Nest's layout check and the runner's candidate validation tested the part's spacing outline against the usable area. That outline circumscribes arcs by up to 0.001, more than any of their slacks, so a disc whose true bounds rest on the work-area edge read as inside the outline's edge spacing (or off the plate at zero spacing) while the same disc on a rectangular sheet, judged on its true bounds, was clean. The outline test now works as the part-spacing check does: the spacing outline finds the candidates and a failure is confirmed on the part's native contour (NativeContours.Region: arcs circumscribed at 0.000025 and clipped to the perimeter's true bounds). Both regions contain the material, so a part past the usable edge by more than the slack still fails; no slack changed. The runner now calls the layout check's own outline test (NestLayoutCheck.InsideOutline): its separately flattened candidate could accept a pose on a slanted edge that the layout check then rejected. Pushes on an outlined sheet measured the same circumscribed perimeter so a part would rest where the review passed, and box pushes stopped 0.0012 short of a wall for it. With the review confirming on native contours they slide the material's own lines and arcs, so a round part rests on a wall exactly as on the plate edge, and a box push rests the box on the wall. Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>