mirror of
https://github.com/ajisaacs/OpenNest.git
synced 2026-11-14 09:15:06 -05:00
ajandClaude Opus 5.5
e6d438629f
On an enclosed machine a cutout slug that tips once cut free can stand up above the sheet and catch the enclosure door when the pallet changes. The head already keeps off cut cutouts, so this is about clearing the door, not the head. Cutting Settings > Cutouts > "Slice slugs the support grid can't hold level" (CuttingParameters.SliceTippingSlugs, off by default, saved per machine thickness and written only when on) makes Plan Cutting cut each such slug along the bed's contact lines (grid rows and columns, slat center lines) before the cutout, so no piece keeps a contact and the pieces drop between the supports. Each slice stops a kerf short of the cutout, so the pieces stay attached until the cutout's own kerf frees them together. A slug the bed holds level, or one on no contact, is left whole; a cutout holding another part or another of its part's cuts is never sliced. Slices are break cuts emitted right after the drawing's own break cuts, pierced on themselves and led straight back to their start. The released-contour proof now leaves out straight break cuts lying wholly inside one of the part's closed holes, since the grid cells they free are scrap; break cuts in material still take part. The plan fingerprint only changes when the setting is on. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>