aj 7127884584 fix(cutting): start tabbed lead-outs at the trimmed cut end ...

A tab trims the perimeter short of its entry, but the lead-out was still
generated from the nominal entry point. An arc lead-out therefore started
off its own radius (ExecutionMotionReader rejected it as inconsistent), and
a line lead-out ran diagonally back toward the entry.

Every lead-out style on a tabbed perimeter now leaves from the trimmed
cut's actual end, on that entity's normal, so arcs are tangent and the tab
gap stays uncut. Untabbed contours and the corner run-out rules are
unchanged. Malformed legacy output is still refused, never refit.

Red before the fix: the three tabbed arc cases threw "Arc has zero or
inconsistent radius" and the line case ended at y=5 instead of 4.8. Keeping
the entry's normal at the actual end fails the curved-perimeter case.

2026-10-04 23:13:41 -04:00

..

directional-slides.md

fix(geometry): resolve blocking contacts across directional slide paths

2026-09-27 23:24:31 -04:00

lead-in-placement.md

fix(cutting): start tabbed lead-outs at the trimmed cut end

2026-10-04 23:13:41 -04:00

pair-spacing.md

fix(geometry): resolve blocking contacts across directional slide paths

2026-09-27 23:24:31 -04:00

visual-overlap-check.md

fix(overlap): retain unchanged pair highlights during rechecks

2026-10-01 15:10:17 -04:00