ajandClaude Opus 5.5 2f91f1b036 fix(engine): forged pinned-contour ordinal stays an Incomplete verdict ...

The 5.5 pinned-entry shortcut in ContourEntryFeasibility looked up the
choice's contour before the probe's own validation, so an owned choice with
an out-of-range contour ordinal threw instead of returning Incomplete as it
did before. The lookup now runs only for an ordinal inside the preparation.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

2026-10-16 15:33:27 -04:00

..

BestEffortCuttingPlanTests.cs

fix(cutting): expose every unverified warning before consent

2026-10-08 13:50:12 -04:00

CircleNextCutTests.cs

fix(cutting): aim round cutouts toward the next cut

2026-10-07 20:55:40 -04:00

ClampZonePreviewTests.cs

fix(cutting): keep clamp zones on cutting-plan previews

2026-10-13 18:15:49 -04:00

ContourCandidateEmissionTests.cs

refactor(cutting): isolate candidate emission for lead validation

2026-10-07 04:28:09 -04:00

ContourCutPinTests.cs

feat(core): contour cut pins

2026-10-16 15:33:20 -04:00

ContourEntryCandidateTests.cs

fix(cutting): anchor near-corner entries to their native edge

2026-10-11 01:14:50 -04:00

ContourEntryFeasibilityTests.cs

fix(engine): forged pinned-contour ordinal stays an Incomplete verdict

2026-10-16 15:33:27 -04:00

ContourEntryRankingTests.cs

feat(cutting): rank contour entries toward the next cut

2026-10-07 02:51:06 -04:00

ContourEntrySelectionTests.cs

refactor(ui): rephrase negative-tone disclaimers as affirmative guidance

2026-10-12 07:45:23 -04:00

ContourRecoveryFileTests.cs

fix(cutting): recover checked routes through interlocking holed parts

2026-10-11 19:51:29 -04:00

CutPinFrameLifecycleTests.cs

test(core): pin frame lifecycle

2026-10-16 15:33:21 -04:00

CutPinResolverTests.cs

feat(core): contour cut pins

2026-10-16 15:33:20 -04:00

CuttingCaptureFidelityTests.cs

fix(cutting): validate original graphs before capture clones

2026-10-04 21:56:49 -04:00

CuttingCaptureRotationTests.cs

fix(cutting): preserve clean geometry through shared graph rotation

2026-10-04 22:26:22 -04:00

CuttingDependencyTests.cs

feat(cutoffs): cut sheet-separating cut-offs after every part

2026-10-13 21:09:35 -04:00

CuttingHoleOrderTests.cs

feat(cutting): propose hole paths toward the perimeter entry

2026-10-07 11:43:26 -04:00

CuttingNestedOrderTests.cs

fix(cutting): trim baked-in seam overcuts and route parts nested in cutouts

2026-10-12 13:40:32 -04:00

CuttingPartOrderTests.cs

fix(cutting): order parts as a short tour and learn blocked approaches

2026-10-05 23:41:11 -04:00

CuttingPlanBatchTests.cs

feat(engine): fixed-lead violations warn instead of refusing

2026-10-16 15:33:23 -04:00

CuttingPlanCommitTests.cs

fix(cutting): create plate-scoped requests through a factory

2026-10-05 00:28:59 -04:00

CuttingPlanMessageTests.cs

feat(engine): fixed-lead violations warn instead of refusing

2026-10-16 15:33:23 -04:00

CuttingPlanServiceTests.cs

Support direct contour piercing and correct planner geometry checks

2026-10-10 16:44:03 -04:00

CuttingProposalInspectionTests.cs

feat(cutting-ui): plan and apply all plates from docked panel

2026-10-11 21:40:26 -04:00

CuttingReplayContractTests.cs

feat(engine): fixed-lead violations warn instead of refusing

2026-10-16 15:33:23 -04:00

DrawingPinCaptureTests.cs

feat(engine): capture and freshness for pins

2026-10-16 15:33:25 -04:00

DrawingPinReviewTests.cs

fix(engine): legacy lead assignment respects pins

2026-10-16 15:33:26 -04:00

ExplicitCircleIdentityTests.cs

fix(cutting): share only exact prepared circle programs

2026-10-04 21:36:40 -04:00

ExplicitContourTests.cs

style(cutting): format emission characterization initializers

2026-10-04 22:10:41 -04:00

FixedLeadWarningTests.cs

feat(engine): fixed-lead violations warn instead of refusing

2026-10-16 15:33:23 -04:00

HoleEndpointBudgetTests.cs

perf(cutting): defer alternate hole entries in preferred pass

2026-10-11 20:26:47 -04:00

HoleLookAheadTests.cs

fix(cutting): aim round cutouts toward the next cut

2026-10-07 20:55:40 -04:00

InterlockingHoleRouteTests.cs

fix(cutting): recover checked routes through interlocking holed parts

2026-10-11 19:51:29 -04:00

JointCuttingPlanTests.cs

feat(engine): fixed-lead violations warn instead of refusing

2026-10-16 15:33:23 -04:00

LazyCuttingSearchTests.cs

perf(cutting): generate ranked alternatives only when visited

2026-10-09 20:40:10 -04:00

LeadMaterialSnapshotTests.cs

Support direct contour piercing and correct planner geometry checks

2026-10-10 16:44:03 -04:00

LeadPathValidationTests.cs

fix(cutting): start tabbed lead-outs at the trimmed cut end

2026-10-04 23:13:41 -04:00

MaterialContainmentTests.cs

fix(cutting): keep ray parity consistent across nominal closure seams

2026-10-12 03:50:54 -04:00

MaterialRuntimeTypeTests.cs

fix(cutting): guard material runtime semantics before capture

2026-10-04 21:36:40 -04:00

NativeContactRegressionTests.cs

perf(cutting): reuse native curve wrappers for lead queries

2026-10-09 19:15:28 -04:00

NearbyMaterialCheckTests.cs

fix(cutting): check every lead against all other material again

2026-10-06 00:47:46 -04:00

NominalContourClosureTests.cs

Support direct contour piercing and correct planner geometry checks

2026-10-10 16:44:03 -04:00

OwnedCuttingParameterTests.cs

feat(cutting): emit owned contours in explicit order

2026-10-04 20:45:15 -04:00

OwnedProgramCopyTests.cs

fix(cutting): retain authored motion metadata in owned programs

2026-10-04 21:56:49 -04:00

PerimeterLookAheadTests.cs

fix(cutting): retain closest-arrival fallback for the last part

2026-10-07 15:56:20 -04:00

PinnedContourTests.cs

feat(core): pinned contour preparation

2026-10-16 15:33:24 -04:00

PinnedLeadWarningTests.cs

feat(engine): pinned contours use the fixed-lead warning path

2026-10-16 15:33:25 -04:00

PlanningCharacterizationTests.cs

feat(engine): fixed-lead violations warn instead of refusing

2026-10-16 15:33:23 -04:00

PreferredContourEntriesTests.cs

fix(cutting): exclude scribes from downstream pierce targets

2026-10-07 14:46:30 -04:00

PreparedContourTests.cs

feat(cutting): emit owned contours in explicit order

2026-10-04 20:45:15 -04:00

ReorderSearchTests.cs

test(cutting): add opt-in complete-route performance probe

2026-10-09 19:15:09 -04:00

ReplayPoseBindingTests.cs

fix(cutting): certify complete selected contour programs

2026-10-04 22:02:56 -04:00

SeamClosureReplayTests.cs

fix(cutting): replay seams whose bridge lengthens the cut

2026-10-16 09:55:49 -04:00

SeamOvercutTests.cs

fix(cutting): trim baked-in seam overcuts and route parts nested in cutouts

2026-10-12 13:40:32 -04:00

SettingsFreshnessTests.cs

fix(cutting): fingerprint only the built-in settings types

2026-10-05 03:16:27 -04:00

SideCoverageRegressionTests.cs

fix(cutting): reuse clear candidates across side coverage scans

2026-10-07 16:05:25 -04:00