Nesting engines

Whole-job engines implement INestingEngine.Solve(NestJob) and are selected by name through NestingEngineRegistry. Every automatic nesting front end validates engine output the same way; see automatic nesting and validation.

Built-in engines

Engines are named for the jobs they suit, not for how or by whom they were built. Engine code lives in OpenNest.Engine/NestingEngines/<Name>/, its tests in OpenNest.Engine.Tests/NestingEngines/.

Engine	Best for	Method
Default	Any job; used when no engine is named	Runs Irregular, then Rectangles, checks both layouts with the layout check and keeps the best: valid first, then fewest unplaced parts, then lowest salvage-credited cost; ties keep Irregular
Rectangles	Plain and near-rectangular plates	Each part packed as the box of its material at its minimum-area rotation, using a maximal-rectangles free list; stock chosen sheet by sheet by salvage-credited look-ahead cost
Irregular	Irregular profiles	No-fit-polygon frontier packing with gap filling and best-fit pairs, six whole-job strategy variants and a tail re-plan
StockLadder	Caller-supplied stock ladders	Constrained-first fill with equivalent-demand area repacking
Fill, Strip, Vertical Remnant, Horizontal Remnant	Single-strategy fills	The fixed placement strategies behind interactive fill; Fill is the multi-phase lattice fill (linear, pairs, rectangle best-fit, remainder)

Neither Irregular nor Rectangles wins every job, even within its own lane, so Default runs both rather than choosing by part shape; Rectangles adds little time and is also the fallback when an Irregular layout fails the check. A candidate that throws is skipped. Default routes the whole job: engines cannot share a sheet, so a job mixing plain and irregular parts goes to both engines whole. A future circle/ring engine joins Default as another candidate.

Rectangles places irregular parts validly, but only as their bounding boxes; it never nests into a notch or hole. Box sides account for how the layout check flattens arcs, so round-edged parts stay valid at box contact.

Interactive/full-area box packing uses the same 90% work-area slack allowance as Rectangles. A free box may absorb a slightly oversized side only at its right/top edge when that edge coincides with the plate work-area boundary. Internal leftover edges keep the strict packing tolerance, and actual part dimensions still determine spacing away from the plate boundary.

Irregular keeps nominal orientation bounds for line-only outlines, so an allowed rotation can fit exactly between the configured plate-edge gaps. These bounds use original rotated line endpoints, retaining material extents even when polygon cleanup discards short-edge chains. Curved outlines retain conservative flattening-error padding. This does not relax part-spacing footprints, no-fit polygons or layout validation tolerances; a part extending beyond the accepted work-area bounds remains invalid.

Irregular fills gaps and open notches using outer profiles; it does not yet place parts inside enclosed cutouts. For a part with two or more copies it also offers its best-fit pairs (two copies interlocked, as the Best Fit viewer shows them) alongside the single copies, and places a pair where both members' free regions allow it. Each pair's internal spacing is re-checked with the layout check before it is offered, and only rotations the part's policy allows are used. A pair may introduce legal rotations beyond the sampled single poses; these remain eligible even when none of the sampled singles fits the stock. Both members block space separately, leaving their notches and intervening gaps available for later parts. Concave no-fit polygons are prepared with a single boundary/containment union. Any remaining numerical hole is filled only when its entire ring is certified to lie in forbidden space, preserving genuine enclosed placement pockets without changing spacing tolerances.

When remaining demand exceeds two, Irregular also offers Fill patterns as optional multi-member candidates, not as solid bounding boxes or a whole-job Fill fallback. It searches the empty work area and physical leftover space for up to two high-area rectangles. Occupied outlines are expanded by part spacing before rectangle search. Each sheet prepares blocks initially and after its first placement, for up to four high-demand-area types; each type has at most eight new Fill preparations per spacing per solve. Repeated rectangles reuse private drawing/candidate caches. Quantity-one and quantity-two requests never run block Fill.

Block members are trimmed to remaining demand, mapped back to source-frame rotations, and checked for legal rotations and internal material clearance before competing with singles and pairs. Group-only rotations do not expand the single-part rotation choices. Placement intersects all member free regions and subtracts each placed member separately, preserving usable gaps. A failed or invalid Fill proposal leaves singles and pairs available. Large enclosed-pocket blocks remain pending the hole-geometry integration; containment cutting order and shop-use safety acceptance remain separate sequencer/verification work.

Filling cutouts (not yet in production)

Placing parts inside another part's enclosed cutout is being built as a step that runs before any engine, so every engine benefits. Only an internal test-only pipeline preview calls it: a part inside a cutout must be cut before the cutout's contour, and the cutting/post safety gates are not complete. Ordinary whole-job calls do not enable this path.

CutoutLatticeFill (OpenNest.Engine/Jobs/Cutouts/) fills one closed cutout with copies of one part. It runs Fill over the cutout's bounds plus one part step on every side, then shifts that lattice across a grid of offsets of up to half a step each way. At each offset it keeps the copies whose spacing-grown outline lies inside the cutout, using the part's inner-fit region of the inscribed, flattened cutout, and the offset keeping the most copies wins. Every returned pose is then checked against the frame and the other copies with NestLayoutCheck.Clears, the test the layout check uses. The method suits many small copies in a large cutout; a few large inserts are meant for no-fit-polygon placement. Fill can return different, equally scored lattices on repeated calls for some parts, so results are not yet guaranteed identical between runs.

The internal CutoutRouter can propose copies from the shifted lattice, then search bounded inner-fit/NFP sample points for remaining copies and other insert requirements. It keeps original requirement IDs, reindexes accepted copies and checks clearance against the frame and every previously accepted insert. Lattice shifts account for occupied poses before quantity trimming; a pre-fill work limit declines giant grids and lets bounded NFP sampling try instead. A null NFP proposal is not proof of geometric impossibility. No material-area ratio cutoff rejects a possible placement: the measured 0.10 and 0.35 ratios guide search order only. Below 0.10 it starts with Fill for three or more copies; between 0.10 and 0.35 it compares Fill-plus-NFP with NFP-only counts; above 0.35 it tries NFP first, then Fill if demand remains, taking the higher-count valid proposal. An 0.20 NFP-only rule would lose a second 4-inch square in a 10-inch round hole. Six geometry-only, anonymized real-job probes and neutral ring fixtures informed the search-order hints; these limited cases are not a global density guarantee. The internal NestPipeline.RunCutoutPreview builds quantity-one proxy instances for eligible closed-cutout frames. It considers legal frame rotations without outer-perimeter symmetry reduction, shifts insert rotation policies into the local frame, and reserves certified router poses by original requirement ID. It can fill multiple holes and repeated/different frame requirements; inserts with a different priority or their own cutouts stay independent, so bundles remain flat. It uses the largest offered spacing for every bundle because the current job contract cannot condition insert demand on the stock selected later. Remaining demand is offered to the selected engine once. Only actually placed proxies expand to original frame and insert identities. An unplaced proxy's reservations return to the original unplaced demand; they cannot be packed retroactively in that same solve. Engine indices and metadata are checked, then every physical pose, stock, rotation, quantity and fulfillment is independently validated before binding caller drawings. Incomplete, forged or geometrically invalid composites return no bindable plates even with invalid-result consent. Candidate evaluation progress is forwarded with unverified proxy commitment counts zeroed; transformed proxy commits are hidden. Physical commits are reported only after physical validation. Preparation is bounded to 32 bundles and 16 base sweep-angle samples per frame (automatic quarter-turns are all retained); remaining copies stay ordinary requirements. Fixed legal proxy orientations are a conservative search choice, not full engine choice among all legal orientations; unsupported bundles remain ordinary independent requirements. This is an internal pipeline path, not a production setting or cut-ready nest. Cutting/post safety remains pending before enablement.

Renamed engines

The registry maps names used by earlier releases (the first two shipped as plug-ins) so saved desktop selections, scripts and API requests keep working:

Old name	Now
`Opus55NestingEngine`	Irregular
`RectanglesNestingEngine`	Rectangles

In v0.3.0 and earlier, Default was the multi-phase fill engine now named Fill. Default now names the choosing engine above, so saved selections, scripts and API requests that name it get that engine. Fill-strategy calls (interactive fill, PlateFillService, console fill without --autonest, MCP fill tools) still read Default as Fill.

Gpt6Astra and Qwen38FlashNext are no longer shipped and have no alias. A saved selection of either falls back to the default engine with the usual status-bar warning.

Changing an engine

A change lands only when it beats the engine's current result on OpenNest.Benchmark for the jobs that engine targets, with every layout valid. Report cost, validity, unplaced parts and time.
Placement must be deterministic: no clocks, unseeded randomness or environment variables. Budget work by counting it; wall time may stop work only through the cancellation token.
Keep each engine's tests passing, including EngineContractTests<TEngine> (quadrants, overflow, priority, cancellation, stock and plate limits, determinism). Every layout in those tests is checked with NestLayoutCheck, the benchmark's validator.
Engines may share code. Move a helper into shared Engine code when a second engine needs it, rather than copying it.

Plug-ins

External engines still load from an Engines/ folder beside the desktop, console, MCP or benchmark executable. A plug-in implements INestingEngine with a public parameterless constructor and registers under its CLR type name. A plug-in whose name matches a built-in engine, or a renamed engine's old name, is skipped: a leftover OpenNest.Engine.Opus55.dll cannot shadow Irregular. Leftover Gpt6Astra or Qwen38FlashNext DLLs still load as ordinary plug-ins until deleted.

11 KiB Raw Blame History