using System.Collections.Generic; using OpenNest.Geometry; using OpenNest.Math; namespace OpenNest.CNC.CuttingStrategy { /// /// A straight line into an arc that ends on the contour start, shared by /// and . The arc's center lies /// the arc radius along the contour normal; the line meets the arc at the approach angle /// (degrees from the normal, on the side the arc turns from) and starts at the pierce point. /// internal readonly struct LineArcApproach { private LineArcApproach(Vector arcCenter, Vector arcStart, Vector piercePoint) { ArcCenter = arcCenter; ArcStart = arcStart; PiercePoint = piercePoint; } public Vector ArcCenter { get; } public Vector ArcStart { get; } public Vector PiercePoint { get; } public static LineArcApproach Create(Vector contourStartPoint, double contourNormalAngle, double arcRadius, double approachAngle, double lineLength, RotationType winding) { var arcCenterX = contourStartPoint.X + arcRadius * PortableMath.Cos(contourNormalAngle); var arcCenterY = contourStartPoint.Y + arcRadius * PortableMath.Sin(contourNormalAngle); // The approach angle is measured back from the normal against the turn, so the arc // runs the short way round to the contour point whichever way it turns. var approach = Angle.ToRadians(approachAngle); var lineAngle = contourNormalAngle + (winding == RotationType.CCW ? approach : -approach); var arcStartX = arcCenterX + arcRadius * PortableMath.Cos(lineAngle); var arcStartY = arcCenterY + arcRadius * PortableMath.Sin(lineAngle); return new LineArcApproach( new Vector(arcCenterX, arcCenterY), new Vector(arcStartX, arcStartY), new Vector( arcStartX + lineLength * PortableMath.Cos(lineAngle), arcStartY + lineLength * PortableMath.Sin(lineAngle))); } /// Rapid to the pierce point, then the line and arc on the lead-in layer. public List ToCodes(Vector contourStartPoint, RotationType winding) => new List { new RapidMove(PiercePoint), new LinearMove(ArcStart) { Layer = LayerType.Leadin }, new ArcMove(contourStartPoint, ArcCenter, winding) { Layer = LayerType.Leadin }, }; } }