using System; using System.Collections.Generic; using System.Linq; using OpenNest.Bending; using OpenNest.Geometry; namespace OpenNest.Shapes { /// /// Flat blanks and sections for the sheet metal shapes: parts bent or rolled along their /// length, cut as a rectangle length along X by the developed width along Y. /// internal static class SheetMetal { public const double BendAngle = 90; public static void Validate(double thickness, double length, double kFactor) { if (!(thickness > 0)) throw new InvalidOperationException("The thickness must be more than zero."); if (!(length > 0)) throw new InvalidOperationException("The length must be more than zero."); if (!(kFactor >= 0 && kFactor <= 1)) throw new InvalidOperationException("The K-factor must be from 0 to 1."); } public static double BendAllowance(double insideRadius, double thickness, double kFactor) => BendMath.Allowance(Math.Angle.ToRadians(BendAngle), insideRadius, thickness, kFactor); /// The blank's outline, with a 90° up bend across it, etched, at each bend line. /// Each bend line's distance from the blank's bottom edge. public static List Entities(double length, double width, IReadOnlyList bendLines, double insideRadius, out List bends) { var entities = new List { new Line(0, 0, length, 0), new Line(length, 0, length, width), new Line(length, width, 0, width), new Line(0, width, 0, 0), }; bends = bendLines .Select(y => new Bend { StartPoint = new Vector(0, y), EndPoint = new Vector(length, y), Direction = BendDirection.Up, Angle = BendAngle, Radius = insideRadius, }) .ToList(); foreach (var bend in bends) entities.AddRange(bend.GetEtchEntities()); return entities; } /// /// The section of a part bent up 90° at its right end (an angle, "_|") or at both ends /// (a channel, "U"): the bottom on Y = 0 from X = 0 to , /// the sides up to , every bend at /// . Dimensioned with the outside sizes, the thickness /// across the right side's top and the inside radius of its bend. /// public static ShapeSideView Section( bool bothSides, double outsideWidth, double outsideHeight, double thickness, double insideRadius, string widthProperty, string heightProperty, string thicknessProperty, string radiusProperty) { const double quarter = System.Math.PI / 2; var outsideRadius = insideRadius + thickness; var right = new Vector(outsideWidth - outsideRadius, outsideRadius); var left = new Vector(outsideRadius, outsideRadius); var w = outsideWidth; var h = outsideHeight; var t = thickness; // Round the outside, counterclockwise from the bottom's left end, then back inside // (a reversed arc runs clockwise from its start angle to its end angle). var entities = new List(); if (bothSides) { entities.Add(new Line(0, h, 0, outsideRadius)); entities.Add(new Arc(left, outsideRadius, 2 * quarter, 3 * quarter)); entities.Add(new Line(outsideRadius, 0, right.X, 0)); } else { entities.Add(new Line(0, 0, right.X, 0)); } entities.Add(new Arc(right, outsideRadius, 3 * quarter, 4 * quarter)); entities.Add(new Line(w, outsideRadius, w, h)); entities.Add(new Line(w, h, w - t, h)); entities.Add(new Line(w - t, h, w - t, outsideRadius)); entities.Add(new Arc(right, insideRadius, 0, 3 * quarter, true)); if (bothSides) { entities.Add(new Line(right.X, t, outsideRadius, t)); entities.Add(new Arc(left, insideRadius, 3 * quarter, 2 * quarter, true)); entities.Add(new Line(t, outsideRadius, t, h)); entities.Add(new Line(t, h, 0, h)); } else { entities.Add(new Line(right.X, t, 0, t)); entities.Add(new Line(0, t, 0, 0)); } var dimensions = new[] { ShapeDimension.Linear(widthProperty, new Vector(0, 0), new Vector(w, 0), ShapeDimension.Down), ShapeDimension.Linear(heightProperty, new Vector(w, 0), new Vector(w, h), ShapeDimension.Right), ShapeDimension.Linear(thicknessProperty, new Vector(w - t, h), new Vector(w, h), ShapeDimension.Up), ShapeDimension.ArcLeader(radiusProperty, right, insideRadius, 3 * quarter, 4 * quarter, "R"), }; return new ShapeSideView(entities, dimensions); } } }