fix: improve arc-tangency fitting and add layered engrave/cut passes for GravographIS

GeometrySimplifier/ArcFit now fit arcs that pass exactly through run endpoints while balancing tangency error between trusted and estimated directions, fixing arcs that previously bulged or broke tangent continuity at fillet/compound-curve junctions. GravographIS post processor gains per-layer (engrave/cut) tool passes via a new GravographISPostConfig, so ENGRAVE/ETCH-tagged geometry runs as a separate scribe pass with its own feed/depth and an operator pause before the cut pass (spring-floated spindle needs a tool swap). Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-08-06 23:15:18 -04:00
parent e493d83899
commit a085339ba9
15 changed files with 1084 additions and 138 deletions
@@ -0,0 +1,81 @@
+using System.ComponentModel;
+using OpenNest.CNC;
+
+namespace OpenNest.Posts.GravographIS
+{
+    /// <summary>
+    /// Cut parameters for one kind of pass (engrave or cut). Edited in the post
+    /// configuration PropertyGrid and persisted to JSON.
+    /// </summary>
+    [TypeConverter(typeof(ExpandableObjectConverter))]
+    public sealed class LayerCutConfig
+    {
+        [DisplayName("Feed (mm/sec)")]
+        [Description("XY and Z feed for this pass. Patches the VS and VZ wire commands.")]
+        public int FeedMmPerSec { get; set; } = 10;
+
+        [DisplayName("Depth (inches)")]
+        [Description("Programmed Z plunge (DZ). Note: the spring-floated spindle means this does not set actual cut depth — tool protrusion does.")]
+        public double Depth { get; set; } = 0.25;
+
+        [DisplayName("Pause Before")]
+        [Description("Stop the spindle and prompt the operator before this pass begins, so the tool can be swapped/adjusted.")]
+        public bool PauseBefore { get; set; }
+
+        [DisplayName("Pause Message")]
+        [Description("Message shown on the controller during the pause.")]
+        public string PauseMessage { get; set; } = "";
+
+        public override string ToString() => $"{FeedMmPerSec} mm/s, {Depth:0.###}\"" + (PauseBefore ? ", pause" : "");
+    }
+
+    /// <summary>
+    /// Configuration for the Gravograph IS post processor: one <see cref="LayerCutConfig"/>
+    /// per cut kind. The engrave block applies to <see cref="LayerType.Scribe"/> paths,
+    /// the cut block to <see cref="LayerType.Cut"/>/<see cref="LayerType.Leadin"/>/<see cref="LayerType.Leadout"/>.
+    /// The cut block carries the tool-change pause by default.
+    /// </summary>
+    public sealed class GravographISPostConfig
+    {
+        [Category("Engrave (Scribe)")]
+        [DisplayName("Engrave")]
+        [Description("Parameters for engrave/scribe geometry (text).")]
+        public LayerCutConfig Engrave { get; set; } = new LayerCutConfig
+        {
+            FeedMmPerSec = 10,
+            Depth = 0.25,
+            PauseBefore = false,
+            PauseMessage = "",
+        };
+
+        [Category("Cut")]
+        [DisplayName("Cut")]
+        [Description("Parameters for cut geometry (outlines). Pauses for a tool change by default.")]
+        public LayerCutConfig Cut { get; set; } = new LayerCutConfig
+        {
+            FeedMmPerSec = 3,
+            Depth = 0.25,
+            PauseBefore = true,
+            PauseMessage = "Change tool",
+        };
+
+        /// <summary>
+        /// Returns the cut config a polyline of the given layer should use, or null
+        /// if the layer is non-cutting (<see cref="LayerType.Display"/>) and should be skipped.
+        /// </summary>
+        public LayerCutConfig ConfigFor(LayerType layer)
+        {
+            switch (layer)
+            {
+                case LayerType.Scribe:
+                    return Engrave;
+                case LayerType.Cut:
+                case LayerType.Leadin:
+                case LayerType.Leadout:
+                    return Cut;
+                default:
+                    return null;
+            }
+        }
+    }
+}